Main > Main Forum

New cabinet: Paint or Laminate? (for the cabinet itself)

Pages: << < (3/3)

pocketbikez:

I like to use Rustoleum Industrial Enamel from home depot. I use the High Gloss Black and High Gloss Red and a foam trim roller. I also lightly hand sand the cab inbetween coats with 220 grit sandpaper.

my last cab was done as follows...

2 coats Kilz primer.

4 coats red on the sides.

7 coats black on the front.

i would wait 24 hours inbetween coats.

the result was a glassy, shiny, hard as nails finish.


Pages: << < (3/3)

Go to full version