Main > Main Forum
T-Stick plus and Oscar's joystick mounting plates
(1/2) > >>
greywolf22:
Hey guys,

Was looking around the board, but didn't happen to come across this.  Currently on my cab I have 2 Joystick mounting plates from Oscar with 2 8-way joysticks.  I'm contemplating purchasing 2 T-stick plus's due to the ease of switching between 4-way and 8-Way.  Does anyone know if I can install the T-stick plus on the joystick mounting plates? Are the dimensions the same as the HAPP's joysticks?  Just wanted to make sure before I ordered a pair.  Thanks  :)
NoOne=NBA=:
The holes are not the same.
The plate on the T-stiks is much narrower than the mounting holes on the Happ sticks.
Paul Olson:
The holes are the same as the inside holes on the Happ sticks.  Japan / Europe use the narrower mount.

With the stick removed, the top of the base is flat so it is easy to use it as a template.

I have a T-Stick Plus for player 1 and a Happ Competition for player 2.  I drilled the holes for the T-stick on both so I can use either stick.  All of the Happ sticks I have seen have both sets of holes.  Original US arcade sticks do not, they only have the wider spacing.

Hope this helps,
Paul
bloodyviking77:
Incidentally, I seem to remember when Andy originally announced the T-Stick Plus there was some talk of a conversion kit to "upgrade" a standard T-Stick . . .

Anyone have any updates?? (or am I just wishing . . .)
Tiger-Heli:

--- Quote from: bloodyviking77 on June 23, 2004, 04:30:11 am ---Incidentally, I seem to remember when Andy originally announced the T-Stick Plus there was some talk of a conversion kit to "upgrade" a standard T-Stick . . .

Anyone have any updates?? (or am I just wishing . . .)

--- End quote ---
I thought I saw one, but that might have been to update the T-Stick to the T-Stick Plus and not the T-Stick Plus Mark 1.  And it looks like the Mark 1 terminology got dropped, so the current Plus is really the Plus Mark 1.

E-mail Andy Warne, though.
Navigation
Message Index
Next page

Go to full version