| Main > Main Forum |
| Anyone have any printable drilling templates for button \ controls |
| (1/2) > >> |
| Hoagie_one:
I got a standard 8-way wico joystick and want a 4 button layout. I'll have two admin buttons on the top. Its for a bar top. I was wondering if anyone had a drill template that comes close to this that I can use so i dont screw this up. Thanks |
| Ed ONeill:
Hey look to posts below I asked for a seven button layout for a similar situation as you recycled past gave me a template for a 6 button lay out and I found that it had to be adjust as the buttons were too far apart. The original template he gave me the buttons were 1.75 apart (center to center) and I had to redo it, so I went with 1.5" (center to center) apart and I am still not too sure this is going to be comfortable enough. My suggestion is to just measure it out on paper and use the template on top of a shoe box. Just my 2 cents. Ed |
| zaphod:
I use the attached document for all my layouts. It's not my controller but all the standard arcade parts I use are included. The buttons are a perfect distance for me and there is an assortment of button groupings. |
| Hoagie_one:
Thank you Mr beeblebrox. That will do nicely |
| Ken Layton:
The A.M.O.A. used to have a template on their site for Jamma standard control panels and Star Tech Journal has one on their back issues cd rom. |
| Navigation |
| Message Index |
| Next page |