Main > Main Forum
question to all about 1 button turn on setups: How did you do it
<< < (4/4)
Onji:
Rebirth I'm using a similar setup as you, i have everything in my standard power strip (right now i just flip the switch on the strip) and everythign comes on BUT the dang TV!!! I have to manually get the stupid remote out, turn the tv on and change it to the svid input 'channel' its so aggravating, and NOWHERE in the tv menus were any options for power on when power is detected etc.
If anyone knows a way around this for a tv, please let me know :)
big_garryb:
mine is in mid-build - but ive got the electrics working and heres how:

standard extension cable inside cab, cable pokes out and plugs in so only single cable visible from outside. when power switched on the TV auto switches on and luckily selects the s-vid channel.

switch on back of cab which is wired into the power switch. quick press and bingo............but heres the good bits.

i have locking, illuninated (blue) switches - on CP there is 3. first one works all the leds inc trackball, illuminated switches and.....thats it. second one works the marquee, third one works the under cab cold cathod (blue) lights. the cab sides are 1 inch off the ground, so get a nice glow underneath!!!!

just my 2p worth.
garry
Navigation
Message Index
Previous page

Go to full version