Main > Main Forum
happ bezel question
(1/2) > >>
the3eyedblindman:
I have a 19 inch tv ill be using for my arcade, i was going to use a 27 inch but i won this for free.  Will a happ controls bezel (19 inch) fit around a 19 inch tv, or are arcade monitors and tvs different in size?
AlanS17:
It's my understanding they are the same. However, the TV will have its own built-in bezel to contend with. You'll likely have to remove it from the case.
the3eyedblindman:
Anyone else know that has done this, or just knows the answer period?
TalkingOctopus:
I used a 27" bezel w/ a 27" TV.  It fit just fine.  I even left the TV bezel on.  There is a very tiny gap between the happ bezel and the tv but I don't mind because I think it is difficult to notice.  I did not really want to remove the TV Bezel.  If you remove the TV bezel, it should fit even better.  

Picture of the bezel and gap:
http://webpages.charter.net/rbecker5/images/sideView.jpg

Just so you know, the shipping for the Happ bezel is rather expensive.
whammoed:
When I got my 19" happ bezel I put it up to my 19" TV  (wasn't using tv, just checking it out).  Seems like a perfect fit but only if you were to remove the TV bezel/case...probably depends a little bit on the tv.
Navigation
Message Index
Next page

Go to full version