| Main > Main Forum |
| ultimarc trackball and mounting plate |
| (1/2) > >> |
| Nefesis:
do you need to buy the mounting plate for the ultimarc trackball if you buy the trackball? |
| mahuti:
If you don't have a metal CP, YES. If you have a metal CP and can cut a whole in it, then no. |
| Nefesis:
i'll have a wood cp, so i guess i'll have to buy it. :( more things to spend money on. |
| patrickl:
Can't you: - take off the top part of the trackball case - route out a hole in a wood CP (to match the top) - bolt the bottom part of the case to the CP |
| mahuti:
If you did that you'd really have to spend a lot of time and effort rigging it up correctly, from what I can tell by looking at mine. I would say it is worth the $14 that it takes to buy the mounting plate... in time alone. Plus, I think the results would turn out MUCH nicer. |
| Navigation |
| Message Index |
| Next page |