Main > Main Forum

How long is your stick? :o

Pages: << < (2/3) > >>

etumor:


--- Quote from: danny_galaga on June 08, 2004, 12:50:48 am ---i would definitely route that. mine is plenty strong enough at 6mm which in biblical terms is 1/4 ". It doesnt feel too short to me but then im used to shortish sticks anyway so i dont notice the extra 6mm. the aluminuim was just to give something nice for the vinyl contact to stick to but i guess it would strengthen it a little...
just had a thought though. you could just do a shallow route on the top side, cut a large hole for the joy to sit in and skin it in ali like mine. then the effect would be the same as if the joys were mounted to a metal panel. drawback would be the wacky shaped hole youd have to cut i guess.
you could just make it from metal...

--- End quote ---

A quick off-topic question Danny,

What did you use to drill through the aluminum?  Was it just a standard hole saw or did you use a forstner bit?  I checked your website, but you don't say specifically.

-Jeff "etumor" Allen

SNAAAKE:

How long is my "stick" ?
Give me a sec...*takes out rular and mesures*

About 7"  :D ;D

Thenasty:


--- Quote from: SNAAAKE on June 08, 2004, 03:41:29 pm ---About 7"  :D ;D

--- End quote ---


Is that 7" from the ground ?  :D


Mine is barely touching the ground. I had to tuck it DOUBLE to stay away from TROUBLE.  ;D

RayB:


--- Quote --- the top of the ball is only 2
--- End quote ---


Minwah:


--- Quote from: etumor on June 08, 2004, 11:50:46 am ---A quick off-topic question Danny,

What did you use to drill through the aluminum?  Was it just a standard hole saw or did you use a forstner bit?  I checked your website, but you don't say specifically.

--- End quote ---

Sorry, I obviously can't answer this for Danny but...

I have just been making an aluminium CP for my analog controls, and used a hole punch (or Knockout as I believe they are commonly known) for button holes.  Oscar swears by Greenlee punches, although I only bought a cheap one as a) I don't need to make many holes and b) I couldn't find any better ones in the UK anyway...  The punch worked superbly  ;D

Pages: << < (2/3) > >>

Go to full version