| Main > Main Forum |
| How long is your stick? :o |
| << < (2/3) > >> |
| etumor:
--- Quote from: danny_galaga on June 08, 2004, 12:50:48 am ---i would definitely route that. mine is plenty strong enough at 6mm which in biblical terms is 1/4 ". It doesnt feel too short to me but then im used to shortish sticks anyway so i dont notice the extra 6mm. the aluminuim was just to give something nice for the vinyl contact to stick to but i guess it would strengthen it a little... just had a thought though. you could just do a shallow route on the top side, cut a large hole for the joy to sit in and skin it in ali like mine. then the effect would be the same as if the joys were mounted to a metal panel. drawback would be the wacky shaped hole youd have to cut i guess. you could just make it from metal... --- End quote --- A quick off-topic question Danny, What did you use to drill through the aluminum? Was it just a standard hole saw or did you use a forstner bit? I checked your website, but you don't say specifically. -Jeff "etumor" Allen |
| SNAAAKE:
How long is my "stick" ? Give me a sec...*takes out rular and mesures* About 7" :D ;D |
| Thenasty:
--- Quote from: SNAAAKE on June 08, 2004, 03:41:29 pm ---About 7" :D ;D --- End quote --- Is that 7" from the ground ? :D Mine is barely touching the ground. I had to tuck it DOUBLE to stay away from TROUBLE. ;D |
| RayB:
--- Quote --- the top of the ball is only 2 --- End quote --- |
| Minwah:
--- Quote from: etumor on June 08, 2004, 11:50:46 am ---A quick off-topic question Danny, What did you use to drill through the aluminum? Was it just a standard hole saw or did you use a forstner bit? I checked your website, but you don't say specifically. --- End quote --- Sorry, I obviously can't answer this for Danny but... I have just been making an aluminium CP for my analog controls, and used a hole punch (or Knockout as I believe they are commonly known) for button holes. Oscar swears by Greenlee punches, although I only bought a cheap one as a) I don't need to make many holes and b) I couldn't find any better ones in the UK anyway... The punch worked superbly ;D |
| Navigation |
| Message Index |
| Next page |
| Previous page |