| Main > Main Forum |
| Help me hack my Imperial trackball! |
| (1/1) |
| jcoleman:
I picked up an Imperial trackball on eBay last year. It's got the mouse board inside, so it can be used as a PS/2 mouse. Since then I've bought a MiniPAC, which is not specifically tailored to work with the Imperial trackball. Since this trackball will be on a removable panel, I need to be able to connect/disconnect it at will. Using Linux and an older motherboard keeps me from being able to disconnect the mouse with the power running. Therefore I have hacked the optic boards so that they are both simple optical boards and have removed the mouse capability from the trackball entirely. What I have now are two Imperial (Wico?) optic boards. I know one works fine, since I didn't touch it. Unfortunately I've just learned (by hooking the dang thing up) that it won't work with the MiniPAC. I know the MiniPAC's optic controls work as I've connected them to my Vortex spinner. Everything is hunky dory on that end. My question is thus: what do I need to do to make these optic boards work with the MiniPAC? Thanks for any help you can offer...Andy, if you're reading...I love my MiniPAC! |
| paigeoliver:
Well, it is going to be hard for anyone to tell you what boards you modified personally are capable of. |
| jcoleman:
--- Quote ---I know one works fine, since I didn't touch it. --- End quote --- :) The other is now wired identically. |
| ErikRuud:
I am really curious about this trackball of yours. I have an Imperial/Betson 3" PS/2 trackball that I bought directly from Betson. When I look inside of it, there are only two boards. One is a standard optics board for one axis. The other is a slight larger board that is the optics and PS/2 mouse on one board. Was yours hacked by the previous owner? Also, does your last post mean that it is working now? |
| Navigation |
| Message Index |