Main > Main Forum
How do i do this?
(1/2) > >>
talem:
OK so i just bought this :

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3294176525&sspagename=STRK%3AMEWN%3AIT&rd=1

and

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3294186332&sspagename=STRK%3AMEWN%3AIT&rd=1



do i just connect the Harnees to the board or do i have to solder anything?
krick:
Do you have a cabinet, power supply, and arcade monitor?
talem:
yes yes i do
krick:
Well, I'm not positive about possible differences in the harness between Tekken and Tekken3 but it appears that you should just be able to hook the Tekken JAMMA board into your cabinet, assuming it's wired with a JAMMA harness.

I can't really tell from the picture but you'll probably need to connect the Player 1 and 2 wires from your cabinet's JAMMA harness to the player 1 & 2 controls, and connect the "kick" harnesses (for the extra buttons) directly to the Tekken board.

Nothing will get soldered to the Tekken board but you may need to do some soldering/splicing of wires in your JAMMA wiring harness.  It all depends on what your current cabs JAMMA harness like.

I'm sure it will be pretty obvious what you need to do when you get all the parts together in one place.

Oh, and I'm not totally sure about the resolution requirements for Tekken.   Depending on your arcade monitor (low/med/hi resolution) this may be a problem.  I'll leave this one for someone more experienced with Tekken to answer.
talem:
well if anyone else can help , please do
Navigation
Message Index
Next page

Go to full version