| Main > Main Forum |
| Those with a Happ rotary optical please read |
| << < (3/3) |
| warham:
that last post is wrong... i got it right from happs site but its wrong. I fried a board using it. This is the correct wiring!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! notice brown is ground!! not 5v like happs site says. Q: What are the wire harness pinouts on the Optical rotary Joystick 50-5619-00? 09/21/05 A: These are the wire colors and pinouts for the loose end of the wiring harness. RED Output A BROWN ground ORANGE +5v YELLOW Output B |
| DillonFoulds:
I hope some of these guys are still around from 7 years ago. If not, i hope they built a time machine 7 years ago, so they could jump to today and read your solution. :S |
| mimic:
And Stephen Hawking claimed there is no time tourists, I guess you proved him wrong warham! :cheers: |
| phildo77:
This thread caused me to blow my boards.... I didn't read it through all the way. :banghead: I know its old but can someone either DELETE this thread, make the solution obvious or kill the offending posts? |
| Navigation |
| Message Index |
| Previous page |