| Main > Main Forum |
| How much t-molding? |
| (1/2) > >> |
| rchadd:
how much t-molding is required for a pacman style cocktail cab? would the 20' be enough? |
| Apollo:
More than enough you only need the T-molding to go around the flat top so unless your cocktail is going to be more than 5' square you will be fine. |
| rchadd:
--- Quote from: Apollo on May 24, 2004, 07:00:44 pm ---More than enough you only need the T-molding to go around the flat top so unless your cocktail is going to be more than 5' square you will be fine. --- End quote --- the midway cocktail cabs have t-moding around 2 sides and also the edges of the CP's http://www.klov.com/game_detail.php?letter=&game_id=8784 |
| Apollo:
OK well if you are building one of those it looks like you will need more than 20'. Remember to have a bit extra for stuff ups. |
| Blakey:
Can't you just measure the bits you want moulded on your plans and then order that distance plus a little safety buffer? 3 of the 6 main panels of my cab are shown below, I added up the routed perimeter in CAD and found it to be 11m (~36'). As t-molding.com only sells in 20' batches, 40' is just right. |
| Navigation |
| Message Index |
| Next page |