| Main > Main Forum |
| Which CPU would you get? |
| << < (7/9) > >> |
| snedger:
Hello Been considering building a small-height few inch high portable cocktail cabinet table top that I can move around. Probably won't happen if I can't find a TFT with sufficient viewing angle. To make things small, quiet and power efficient I've been researching plopping mobile CPUs into a desktop build. Intel appear to be quicker, but require a specific mobile mobo and for AMD Turion you can plop them on a lot of 754 socket mobos, oh, and they are 64 bit. When is the 64 bit version of mame going to be ready? ;) And is anyone also working on a dual core version yet? Much less cooling is required, which means almost no noise. According to some web articles, as long as a powerful graphics card is not used, then passive cooling should be possible. Although a casbinet fan is probably going to be needed and spoil the whole noiseless effect - just turn the speakers up! Cheers snedger |
| thetered:
Let me ask a semi off topic question then, I just bought a AMD Sempron 2500 but my motherboard and windows identifies it as a 1000mhz AMD Athlon. Is it supposed to say that? |
| pointdablame:
--- Quote from: thetered on June 24, 2005, 12:26:39 am ---Let me ask a semi off topic question then, I just bought a AMD Sempron 2500 but my motherboard and windows identifies it as a 1000mhz AMD Athlon. Is it supposed to say that? --- End quote --- Sempron 2500+'s are supposed to be run at 1.75Ghz. Your FSB and/or your Multipliers are set incorrectly in your BIOS. |
| D10:
--- Quote from: pointdablame on June 24, 2005, 12:30:13 am --- --- Quote from: thetered on June 24, 2005, 12:26:39 am ---Let me ask a semi off topic question then, I just bought a AMD Sempron 2500 but my motherboard and windows identifies it as a 1000mhz AMD Athlon. Is it supposed to say that? --- End quote --- Sempron 2500+'s are supposed to be run at 1.75Ghz. Your FSB and/or your Multipliers are set incorrectly in your BIOS. --- End quote --- Or it could be a jumper setting on the board it self. |
| pointdablame:
--- Quote from: D10 on June 24, 2005, 01:05:48 am --- --- Quote from: pointdablame on June 24, 2005, 12:30:13 am --- --- Quote from: thetered on June 24, 2005, 12:26:39 am ---Let me ask a semi off topic question then, I just bought a AMD Sempron 2500 but my motherboard and windows identifies it as a 1000mhz AMD Athlon. Is it supposed to say that? --- End quote --- Sempron 2500+'s are supposed to be run at 1.75Ghz. Your FSB and/or your Multipliers are set incorrectly in your BIOS. --- End quote --- Or it could be a jumper setting on the board it self. --- End quote --- quite right... check your motherboard manual to make sure it's on the correct setting if there is in fact a jumper. |
| Navigation |
| Message Index |
| Next page |
| Previous page |