Main > Main Forum

Custom printed button ID Tags?

Pages: (1/3) > >>

RabidSquirrel:

HappControls sells button ID Tags:



http://www.happcontrols.com/index.html?http://www.happcontrols.com/pushbuttons/95400900.htm!

and they say on their site that "Custom lettering and artwork available (nominal charge may apply)". I emailed them and they no longer do that unfortunately.

Everyone who comes over to play on our arcade has no idea what the buttons do. Does anyone know where I can get custom ID Tags for my arcade?

NoOne=NBA=:

You could just make your own.

Get some Avery Inkjet label paper at your local office store, print what you want on it, put shipping tape over the labels to protect them, and then cut through the entire sheet to get the label to size.
You can do custom colors and shapes this way, as well.
It will provide a cheap, but relatively durable label that you can put on wherever you want.

The only downside is that it is not water-resistant.
If you spill water on your CP, it will soak in between the tape and the adhesive, and ruin the paper label between them.

gtjoe:

Just use a electronic label maker with clear tape
i.e http://www.keysan.com/ksu3768a.htm#BRT999503913460

I used clear tape with black lettering and put them on my oak control panel.  No problems with them peeling off at all.

And... its waterproof :)

RabidSquirrel:

Both aren't bad ideas, but I really want it to look nice and professional. I might have to settle if I cant find anything though.

Generic Eric:

I use a label maker at work (not on arcade machines) does that make it professional?

hehe

Pages: (1/3) > >>

Go to full version