Main > Main Forum
repairing MDF
<< < (2/2)
fredster:
I agree with the Bondo idea if you want to restore the edge.  Wood putty is just too weak to make a corner that will stay.  It's okay for a dent or to fill holes, but not for structure.

What I do for some corner breaks is just to cut the corners off at 45
spystyle:

--- Quote from: rsoandrew on May 17, 2004, 10:15:23 pm ---Has anybody come up with a decent way to repair banged up corners/edges on MDF? Not really interested in a restore, just want it to look a little nice.

--- End quote ---

I recommend Bondo (automobile filler)
It is inexpensive and tough as nails, sand it with 60 grit sandpaper on an electric sander after it dries
(then progressively higher grit sandpaper)

You can make carboard forms to apply it to the corners

Dig it?
Craig
cica:
The best filler I've found is Durham's Rock Hard Putty.  You can find it in a can at your local True Value Harware store.  It is a powder that you mix with water.  When it hardens. it can be easily sanded and feathered.  It is much easier to work with than Bondo and is odorless.

-Tom
Lance:
Hey Tom,

I agree Durhams is good stuff, however for larger repairs it isn't the greatest.  I used durhams for the initial repair of the corner, however it cam loose and popped off when I was removing the old t-molding.   The bondo seems to be so solid I don't thing it would do the same thing.

For surface scratches or dents I used durhams extensively and it worked great though.
Navigation
Message Index
Previous page

Go to full version