Main > Main Forum
Routing. Am I doing something wrong?
(1/4) > >>
Apollo:
OK so I've got my 1/16" slot cutter, it's definately on the right way, lol. The problem is when I'm cutting the slots in my ply I'm getting a hell of a lot of smoke and I mean a lot of smoke. I'm cutting fairly deeply so I tried doing one pass at a more shallow depth and then doing a second pass to finish but still loads of smoke. Am I doing something wrong or is this fairly normal?
Cheers.
Apollo:
Well I don't seem to able to remove this thread but my problem is solved, thankyou.
Tiger-Heli:

--- Quote from: Apollo on May 15, 2004, 05:18:23 am ---Well I don't seem to able to remove this thread but my problem is solved, thankyou.

--- End quote ---
What was the problem/solution?
SirPeale:
Yes, please.  Always post a solution to a problem.  That way, others may learn from your mistakes.
saint:
I would guess moving the wrong way from left to right or vice versa. Moving one way with the router you're going against the spin, the other way you're going with it.
Navigation
Message Index
Next page

Go to full version