Main > Main Forum

GamePad Wiring then .ini issues

Pages: (1/6) > >>

blue:

I'm going to starting to wire up 2 Interact Axispads for my control panel, was just wondering if anyone has had success with this?
Do you know if these pads have one common ground?
Will there be a problem having 2 game pads of the same type?

Any input would be great.

NoBonus:

How are you going to connect the gamepads to your computer? Are you going to use an input (usb, etc) for each gamepad? or are you wiring them together?

NoBonus

blue:

Well each pad hads a USB connection so i was just going to use that, probably through a USB Hub.

NoBonus:

Then you should be okay.  I am not sure if they have common grounds, but you can always error on the safe side and wire each of the ground sections on the PCB. Grounds are generally identifiable by looking for multiple switches on the same circuit. The grounds can be on a shared circuit (if that is how the thing is designed) and the other half of the switch cannot share a circuit with anything else...  if you can take a photo of the PCB and post it, I might be able to point out your grounds and stuff...

NoBonus

blue:

thanks for the info nobonus...

well game on if this works... i'll let everyone know if these pads work out well.

Pages: (1/6) > >>

Go to full version