Main > Main Forum

Outwater vs t-molding.com (plus Aussies wanting moulding look here)

Pages: << < (2/2)

Blakey:


--- Quote from: rdagger on May 17, 2004, 02:20:29 am ---I checked out Outwater's web page at the silver and chrome in 5/8 and 3/4".  It states the minimum order is 250 feet.  Also you may want to consider that the metallic sizing is not a true 5/8 or 3/4".  You could have some wood showing if the molding is to narrow and I don't think you can trim the metallic moldings if it is too fat.  If you buy the silver post a picture.

--- End quote ---

Yeah, I wasn't sure about that. At one point it said min order 250ft, at another it said $25. Still haven't had an email from them, guess I'm small fry.

t-molding's chrome is clear with a chrome layer, then a top clear layer, so it can't be trimmed. My timber is 18.6mm wide, that leaves 0.5mm overhang on each side, not unacceptable.

exian:


--- Quote ---Finally, any Aussies want some moulding and want to split the shipping?
--- End quote ---

For all you other aussie's out there you can get t-moulding from Galvin's Hardware in Western Australia and South Australia. A friend of mine bought some a while back and it was about $2.50 a metre...

There web site is:

http://www.galvins.com.au/Hardware/index.html

Pages: << < (2/2)

Go to full version