| Main > Main Forum |
| Cooling Custom Arcades?? |
| (1/3) > >> |
| Kampfflieger:
If i put a motherboard without case inside a custom arcade, maybe it don't heat like if where inside the PC Case. I'm open to good suggestions to cooling a custom arcade, beforehand thanx!!! |
| rsoandrew:
That's my plan too. I figure that as long as there are some type of vents in the back and some on the top of the cab, natural convection will take care of the rest. I |
| rsoandrew:
That's my plan too. I figure that as long as there are some type of vents in the back and some on the top of the cab, natural convection will take care of the rest. I |
| Tilzs:
just cut some slots in the back for some vent slots and mount a pc case fan. You might want to have a couple slots with a couple of fans, maybe one blowing in and one out. Monitor is going to generate most of the heat, and remember heat rises. |
| FoX:
Yea...a fan pulling in cool air low and one expelling hot air uptop should be sufficient |
| Navigation |
| Message Index |
| Next page |