| Main > Main Forum |
| Arkanoid spinner question |
| (1/2) > >> |
| nomad:
Its probably been asked before, but here is my question anyway: Is it possible to connect an Arkanoid spinner to an Optipac/Minipac? If so, does it require any modification to the spinner? Thanks. |
| AlexC:
Another question, how do you get the top off the spinner to remove spinner from old CP ??? Sorry didn't want to start another post to ask that question :) |
| Thenasty:
--- Quote from: AlexC on May 03, 2004, 03:30:54 pm ---Another question, how do you get the top off the spinner to remove spinner from old CP ??? Sorry didn't want to start another post to ask that question :) --- End quote --- Thru the hole on the side of the Spinner TOP. YOu need an Allen wrench to lossen it up. Take a look at the pics here of the arkanoid spinner top. http://www.arcadecontrols.org/yabbse/index.php?board=10;action=display;threadid=17522 |
| Thenasty:
--- Quote from: nomad on May 03, 2004, 03:25:53 pm ---Its probably been asked before, but here is my question anyway: Is it possible to connect an Arkanoid spinner to an Optipac/Minipac? If so, does it require any modification to the spinner? Thanks. --- End quote --- Maybe changing the board w/a PS2/Serial/USB mouse should do it. It requires a little hacking/work tho. |
| AlexC:
The spinner top that I have is different. It has two pinsize holes on each side. I goes straight thru. |
| Navigation |
| Message Index |
| Next page |