| Main > Main Forum |
| Control Panel for 1981 Qix Machine. |
| << < (3/3) |
| mllkat:
:) You guys ROCK!! I appreciate all the input. Let's just see now if I can get the job done. Thanks again for your suggestions. Mllkat |
| dogg0:
--- Quote from: Apollo on April 25, 2004, 08:06:38 pm ---I would suggest you don't mutilate that CP but that you get a sheet metal business to make you a blank copy of the panel, have it drilled ( you could do that yourself ) and the powder coat it. Then just SF layout should fit fine. --- End quote --- do you know of any online sheet metal places? or what to look for in the yellow pages? or what to ask when you find them? I have a 1981 Scramble machine that I need to put a new cp in. thanks. |
| Stingray:
--- Quote from: dogg0 on April 27, 2004, 03:46:29 pm --- what to look for in the yellow pages? or what to ask when you find them? --- End quote --- Look under Metal fabricators. Take your old panel in and have them replicate it. They can also punch holes where ever you like. -S |
| Lance:
I would just build one out of wood. My friend has a taito cab that we are working on and it you will save yourself a lot of effort if you just make a wood (mdf) panel. The clips that hold the panel down are bolted on to the metal panel so it would be easy enough to just do the same on a wood panel. |
| hyiu:
I think mine is an old 24 in cab... so the CP is just like 22.5 in or so.... http://geocities.com/hyiu/pics/Arcade/Cab_and_Stick/ you can check out the link, and click on the pics... it was a metal panel, and I redo it with wood... and actually have enough space below to have a keyboard drawer... (but its tight....) so... it should fit 2 player SF style.... good luck... |
| Navigation |
| Message Index |
| Previous page |