| Main > Main Forum |
| Where should I start? |
| (1/1) |
| GameDork:
I have this Pacman cabinent I'm restoring. I have sanded all the gray paint from the artwork and I wanted to repaint this. I have done more sanding since the pic was taken. Any have an hints? Do I mask off the graphics and do the yellow first or vice versa? Roller or spray? Do the small stuff with a artbrush? |
| paigeoliver:
Roller the cabinet yellow. As for the small stuff, I would PERSONALLY use a small brush, but that is because my airbrush skills aren't too hot. |
| spystyle:
Brushes and roller for sure, get brushes with nylon bristles and a small roller, paint from top to bottom. Take your time and you should be all set. Dig it? Craig |
| GameDork:
I have started now. I have masked off the graphics with acetate stuck on with 3M photo adhesive (This stuff rocks!) and am painting the yellow right now. later, I will mask off parts at a time and just do that one piece ( i.e. the word "PAC" ) until I am finished. I will post some pics here as soon as I get it cleaned up. Thanks to everyone for your replies. Brandon |
| Navigation |
| Message Index |