| Main > Main Forum |
| Schematic: Basic AC Arcade PC Wiring |
| << < (2/3) > >> |
| SirPeale:
This schematic depends on whether or not you're using an ATX power supply, too. I'm using an AT. Should have posted that, but still...it would work in that scenario (with restart after power loss) There is something I haven't tested yet, that's bridging pin 15 and ground on an ATX power supply. Should render it on all the time. That way you would still have the one switch solution. |
| General Zod:
AHHH !! Very nice indeed to see this on-screen. Glad my pictures helped a little bit. Or at the very least gave some insight on what you're hoping to accomplish. http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=18453 I was ABLE to use an ATX power supply, and wire my cab exactly like the BobRoberts diagram. I just for the life of me can't remember how the PowerON pins on my board are jumpered. I believe, when looking at the wires....its more than likely an unused wire on the Jamma Harness, as I'm using the Jpac. Also, like mentioned in the previous post. The OS is DOS, which doesnt require a shutdown process similar to windows. The main switch on top of the cab powered EVERYTHING at one flick. I also don't recall altering any settings in the BIOS for power features. Still, it feels pretty good inside knowing you've helped someone out. ;) |
| SirPeale:
Actually, your setup wasn't even a consideration in the process. Sorry to burst your bubble! |
| General Zod:
No bubble bursting going on in here, mate ! I just figured since I had posted about this 2 days ago with no reply, that you might have been off secretly working in your lab to devise a solution. ;) We're already on the same page as far as wiring. Perhaps I was wrong to think different, or for that matter even assume your thread was in any relation to my wiring question. It's cool though , no problems on this end. 8) I'm all for putting both of our ideas together and reaching a workable solution. Instead of using the SmartStrip, Craftsman or any other strip. :-\ |
| hulkster:
hey dont be knockin the craftsman!!! 8) |
| Navigation |
| Message Index |
| Next page |
| Previous page |