| Main > Main Forum |
| leaf button question |
| (1/2) > >> |
| nomad:
For my metal control panel, I would like to have some translucent leaf buttons. However, I have seen that only "short" leaf buttons mount easily to a metal cp. I would like to use some colors the come only in the long variant. On Bob Roberts' site, I noticed that he says that one can mount "long" buttons using spacers. I am just wondering where you could obtain the spacers or if you could make them out of pvc piping or something? |
| FractalWalk:
Evidently, certain suppliers provide spacers, but mine did not. I was using short buttons on wood and only needed to use washers as a spacer. For you, PVC would work well. |
| nomad:
Thanks. I have another question too. On Wico's site there are two different leaf holders. One has tungston thing on the switch and the other has some other material. Does it make a difference which holder I purchase? |
| paigeoliver:
You aren't really going to wear out any new leaf switches in home use, so even the cheaper ones should be fine. Heck, I regularly install 20+ year old ones in games, and even those are fine. |
| nomad:
Thanks for the advice :), but I have one more n00b question for your guys. For leaf buttons, I noticed that you must have the button holder assembly, leaf switch, button, and a pal nut. On Wico's site however, there is this item called a distance washer. Is that thing just a spacer so that one could put long buttons in a metal cp, or does it serve some other function? |
| Navigation |
| Message Index |
| Next page |