Main > Main Forum

Router bit size for T-molding.

Pages: << < (3/6) > >>

jimmyjet:

If you didn't hit any nails or screws with the slot cutter, I would call the company and complain.  There is no way the mdf could tear the carbide tips off the bit in that short amount of time.  MDF is notorious for dulling carbide quickly, but not pulling tips off.
jimmyjet


dmsuchy:

no, didn't hit nuthin, I WILL write to them!

spauldingd:

Wow, I bought my bit from MLCS and didn't have any problem cutting my MDF.  I was paranoid when I was using it.  The thing looks so lethal I was afraid it was going to come apart or something.  I bought the 1/2" size collet and cut about 30 feet on my project and it worked great.

Dave

Apollo:

Sounds like you had the bit on backwards to me........

SirPeale:


--- Quote from: Apollo on May 09, 2004, 08:11:51 pm ---Sounds like you had the bit on backwards to me........

--- End quote ---

I was just going to say that.  An incorrectly placed bit would certainly do that.

Pages: << < (3/6) > >>

Go to full version