| Main > Main Forum |
| Required tools for building a cabinet. |
| (1/4) > >> |
| guytalbot:
What is the minimum power tools needed for constructing a cabinet? I have all the hands tools I am sure but don't have a lot of wordworking tools. |
| Apollo:
Depends on how you plan to build it but I can tell you what I used. Circular saw (indespensible) Router Jigsaw (indespenible) Mains powered drill (indespensible) Battery powered drill Electric spray paint gun Electric sander Angle grinder Drill press You can probably get by without a few of these i.e. paint spray gun, electric sander etc. You could probably do the whole thing with a jigsaw only if you really wanted to but I personally wouldn't. |
| Santoro:
Assuming a wood Control Panel, Bare Minimum: Circular Saw with newish blade Straightedge for use with circular saw Power Drill Cordless Drill/w screwdriver bits Handheld Jigsaw Good Wire Stripper Router with bits for T-molding and Laminate 1 1/8" spade drill bits Not required, but make it super-easy Table Saw Drill Press Electric Sander 1 1/8" Forstner Drill Bit |
| Tilzs:
I used: Ciricle Saw Straight Edge Dremel Advatage Rotary saw Drill Router |
| Aceldamor:
I used: Circlular Saw Jig Saw Straight Edge Wire Strippers Phillips Screwdriver Power Drill with 1 1/8 spade drill bit and forstner bit Battery operated Drill Sander There is some kind of tool you can use to score plexiglass (to cut it) that I used Router off the top of my head, that's what I used |
| Navigation |
| Message Index |
| Next page |