Main > Main Forum
Marquee Mounting
<< < (2/3) > >>
SuperRabbit0:
Thanks so much for the offer but I am in Canada.  Airfare might be even more than shipping    ;D

On a related note, have any cabinets used a non-lit marquee?  This is going to be a very compact tabletop for my kids and I am not sure I want them to worry about turning the marquee on and off (and it might be a little too fun to do that if anyone with young kids knows what I mean...)

I am hesitant to leave out the backlight without seeing some examples of cabs built that way.
paigeoliver:
Sprint One, many ATW cabinets, and some other machines used unlit marquees.
AlexC:
Home Depot sells metal corner pieces for a little over $2.00 . They are about 10 feet long and are colored white. I cut the pieces to size with a dremel, drilled the screw holes and painted them with black hammered spray paint I had left over from repainting a coin door.
They work and look great.
I'm at work so can't post any pics ATM but I can post some later if you want.
OSCAR:
Here are a couple older threads that you may find useful:

http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=9978
http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=6567


SuperRabbit0:

All those suugestions are great!  Thanks so much for the help.  I am not sure how I couldn't find those previous threads.  I did look for a while...

Thanks again!
Navigation
Message Index
Next page
Previous page

Go to full version