| Main > Main Forum |
| Best makeshift spinner knob |
| << < (4/5) > >> |
| NIVO:
well if you had the equipment or know someone that had the equipment you could build your own like I did. Saves all kinds of money the more you can do yourself. |
| NoBonus:
That seems like you must have access to some serious equipment. Did you make the spinner or just engrave it? |
| NIVO:
both. I made several at the time, about 2 years ago, in fact JustMichael, another mod on here has one of them. These were made long before Oscar built his(which is also a fine knob as well I might add). |
| Tiger-Heli:
--- Quote from: NoBonus on April 13, 2004, 04:34:27 pm ---My second major issue (after the $$) is the shaft size. I am using a non-standard shaft size, so whatever knobs I do end up getting will have to be doctored to work properly. Thus, spending $15 on a nice knob might be a waste if I happen to break it or cannot doctor it properly. NoBonus --- End quote --- Hmmmn, I think most of the knobs are going to be made for the 1/4" shaft size. You might be better going with a model 3 spinner and the cheapest $6 knob, or a stereo knob. Come to think of it, if anyone has the Twisty-Grip spinner plans, they recommended a knob and I contacted the vendor and they sent me a demo knob for free. I don't remember who it was or know for certain where it is anymore, but it's an option to consider. |
| DrewKaree:
--- Quote from: Stingray on April 13, 2004, 02:44:54 pm ---...I saw several items that had big knobs that would look great on a spinner. --- End quote --- *insert Butthead laugh and voice* you said big knobs! :o |
| Navigation |
| Message Index |
| Next page |
| Previous page |