Main > Main Forum

CP/Marquee help, Information OVERLOAD suggestions please!!

Pages: << < (2/2)

Arcadiac:

Found a good resouce for plotting out different CP Layouts:

http://www.move360media.com/mame/icpd/Launch.htm

Used ICPD, screen capture and M$ picture it to come up with this scheme, tell me what you think.  Left some of the buttons move to the front of the panel to give more space on top but its still crowded.  LMK what y'all think of the layout.  Thanks! Arcadiac


JoyMonkey:

Take a look at this thread. In the middle of the thread I posted a drawing of the same panel with a 6 button layout. I ended up using plain old 1/8" aluminum.

The sticks are Wico top-fires (manufactured by STC). RandyT also sells them here.

Sorry, I can't make any CPs for people. I was lucky that my boss let me use the CNC machine for my own CP, he's pretty touchy about using it for non-work related stuff and I'm sure it'd cost a fortune to have the same thing done. If you had a good hole saw and some .090 aluminum you could probably do it by hand.

I've been using CorelDraw for layouts,  it's simple to use and works well with the CNC machine's software. You should be able to find an old version on eBay for pretty cheap.

Pages: << < (2/2)

Go to full version