| Main > Main Forum |
| How to mount joysticks |
| (1/1) |
| krick:
I know this has probably been discussed to death but I can't seem to find any really good threads on the subject. I'm making a new control panel. My cab has a 3/4" MDF control panel. The current joysticks look very much like Happ Competition sticks. I don't see any identification on them so I'm not sure. Anyway, the're just bolted to the underside of the panel using carriage bolts through the top of the MDF. There's a layer of plexi on top of the control panel. I don't think I will use plexi on my new panel. I plan on getting new sticks, possibly the T-Stick Plus model from Ultimarc. From what I've read, I'll need to rout out a depression on the underside of the panel so that the thickness is only 1/2". Can I just bolt them down with carriage bolts? Will 1/2" MDF be strong enough? Should I be using a metal plate like this?... http://www.dameon.net/BBBB/joyplate2.jpg I saw that some people were able to attach joysticks without screw heads showing. I would much rather have this than carriage bolts. What hardware is used to do this? Where do I get it/them? Again, will 1/2" of MDF be strong enough? Any tips and tricks that people can impart will be greatly appreciated. |
| GGKoul:
Oh my god!!! This is the 3rd post about mounting joysticks in the last 24 hrs!! http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=17537 http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=17412 Yes a 1/2 inch of MDF will support the joysticks |
| krick:
--- Quote from: GGKoul on March 26, 2004, 11:51:05 pm ---Oh my god!!! This is the 3rd post about mounting joysticks in the last 24 hrs!! http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=17537 http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=17412 Yes a 1/2 inch of MDF will support the joysticks --- End quote --- Yeah. Well, the first thread went off on a tangent about mounting a J-PAC. And the second turned into a religious debate about using 1/2" plywood vs 3/4" MDF. What I really need is information about the hardware involved and what my options are. |
| Sasquatch!:
--- Quote from: krick on March 26, 2004, 11:01:48 pm ---I saw that some people were able to attach joysticks without screw heads showing. I would much rather have this than carriage bolts. What hardware is used to do this? Where do I get it/them? --- End quote --- Tee-nuts - you would screw in the joysticks from the bottom of the CP using them. I would imagine a good hardware store would have them, but I've never looked. |
| froggerman:
Home Depot has T-Nuts. (If there is one near you) |
| Navigation |
| Message Index |