| Main > Main Forum |
| 1/2" vs. 5/8" vs. 3/4" MDF |
| << < (4/5) > >> |
| soslo:
I used 3/4" melamine...weighing in at a cool 104 pounds per 4x8 sheet. Diss. Wheels are a must have. |
| SeanFu:
--- Quote from: soslo on March 25, 2004, 05:02:12 pm ---I used 3/4" melamine...weighing in at a cool 104 pounds per 4x8 sheet. Diss. Wheels are a must have. --- End quote --- Doesn't that stuff chip when you cut it? |
| SNAAAKE:
--- Quote from: SeanFu on March 25, 2004, 11:45:53 pm --- --- Quote from: soslo on March 25, 2004, 05:02:12 pm ---I used 3/4" melamine...weighing in at a cool 104 pounds per 4x8 sheet. Diss. Wheels are a must have. --- End quote --- Doesn't that stuff chip when you cut it? --- End quote --- Sure does but you can use masking tape and cut with a reverse tooth jigsaw blade or a circular saw :) As for the topic,get anything stronger then 1/2".I mean if you are concerned about the "cost" of wood then find yourself another hobby cuz this one ain't cheap...AT ALL ;) A cab made out of 1/2" wood will probley just fall apart in like a day unless you are building one of those "frame" like cabs.I would personally stick to 5/8". |
| soslo:
--- Quote from: SeanFu on March 25, 2004, 11:45:53 pm --- --- Quote from: soslo on March 25, 2004, 05:02:12 pm ---I used 3/4" melamine...weighing in at a cool 104 pounds per 4x8 sheet. Diss. Wheels are a must have. --- End quote --- Doesn't that stuff chip when you cut it? --- End quote --- Kinda. Using a circular saw, it only chips slightly on one side, so I put the "good" side down and it leaves a perfect edge. Depends on which direction the blade rotates/cuts. I suppose masking tape would work, though I haven't tried it. |
| MameMe:
--- Quote ---As for the topic,get anything stronger then 1/2".I mean if you are concerned about the "cost" of wood then find yourself another hobby cuz this one ain't cheap...AT ALL --- End quote --- I'm not concerned about the cost. It seems that this project will be very HEAVY. I hope putting wheels on the bottom will make moving it easier. I also hope that when I roll this beast into the house and downstairs that I don't end up breaking tile or tear the carpet. |
| Navigation |
| Message Index |
| Next page |
| Previous page |