Main > Main Forum
is having access to the inside of my control panel pedestal, really necessary?
<< < (3/4) > >>
Stingray:
I'm not sure if that's what they're actually called or if you can even get them at Home Depot. Mine were attached to the cab when I bought it. The tabs on my control panels are home made. You may have to buy them from an arcade specialty site like Bob Roberts or Happs.

-S
NoOne=NBA=:
You can do everything you need to do to the coin door from the front, so I wouldn't waste the time.
hyiu:
yes, its called panel clamps...

try Happs or Bob Roberts...

they both have it...

I believe Bob is cheaper...  ;) ;)

and its VERY TIGHT when you clamp it down...

I used 4 clamps to clamp down my control panel....
(nothing else...) and I have tried to shake it really hard to see if the clamps are good.... its rock solid and I can shake the machine but the cp deosn't move a bit....

but make sure when you screw the clamp and the hook, you need to leave a gap so that the clamp is "biting" on the hook tight....

ps: HD doesn't carry it....
hulkster:
cool, ill try it out.  thanks a lot!
GamingGreg:
Another option is industrial strength velcro around the edges.  I've used it on my panel, and it really stays in place.  My kids can't get it off, and it takes be a bit of tugging to get it off (but I can get it off).
Navigation
Message Index
Next page
Previous page

Go to full version