Main > Main Forum

removing lock from coin door w/o key

Pages: << < (2/3) > >>

MinerAl:

Shotgun.

 ;D

GamingGreg:

 If you can't get to the back of the lock, you can try the old screwdriver trick.  Just insert a screwdriver and turn hard until it moves 1/4 turn.  Typically these locks are not that good, so that works.   Then you can remove the lock and replace it.

Ken Layton:

Is the door already installed on a machine or did you just buy it and haven't put it on?

nomad:

I am thinking about purchasing a coin door from ebay and the guy does not have the key for the one I am interested in.  So I was just wondering how one would go about removing the lock.  Thanks for the replies :)

Thenasty:


--- Quote from: nomad on March 22, 2004, 03:21:11 pm ---I am thinking about purchasing a coin door from ebay and the guy does not have the key for the one I am interested in.  So I was just wondering how one would go about removing the lock.  Thanks for the replies :)

--- End quote ---

Easy:
1. Remove the NUT
2. Remove the CAM
3. REMOVE another NUT under the CAM
4. Pull it out.
5. Replace w/a new one.

Pages: << < (2/3) > >>

Go to full version