| Main > Main Forum |
| removing lock from coin door w/o key |
| << < (2/3) > >> |
| MinerAl:
Shotgun. ;D |
| GamingGreg:
If you can't get to the back of the lock, you can try the old screwdriver trick. Just insert a screwdriver and turn hard until it moves 1/4 turn. Typically these locks are not that good, so that works. Then you can remove the lock and replace it. |
| Ken Layton:
Is the door already installed on a machine or did you just buy it and haven't put it on? |
| nomad:
I am thinking about purchasing a coin door from ebay and the guy does not have the key for the one I am interested in. So I was just wondering how one would go about removing the lock. Thanks for the replies :) |
| Thenasty:
--- Quote from: nomad on March 22, 2004, 03:21:11 pm ---I am thinking about purchasing a coin door from ebay and the guy does not have the key for the one I am interested in. So I was just wondering how one would go about removing the lock. Thanks for the replies :) --- End quote --- Easy: 1. Remove the NUT 2. Remove the CAM 3. REMOVE another NUT under the CAM 4. Pull it out. 5. Replace w/a new one. |
| Navigation |
| Message Index |
| Next page |
| Previous page |