Main > Main Forum
Which wood would a woodchuck MAME?
(1/4) > >>
chrisindfw:
Quick and dirty...

What wood did you use for your control panel and/or Cabinet?

SpamMe:
3/4" MDF, but I would rather have used ply.
Santoro:
3/4" MDF with Lexan on top.

Worked great.
GamingGreg:
My cabinet's built of 3/4" plywood, and I built my control panel out of the same.
unclet:
I used 3/4 MDF on the two side panels and the shelf which holds the TV and 1/2 MDF everywhere else.   This reduced the weight of the beast.  

PS:  I loved the MDF since I did not need to sand it before painting
Navigation
Message Index
Next page

Go to full version