Main > Main Forum

Neat tool i found to help drill holes in CP's

Pages: << < (5/6) > >>

Grasshopper:


--- Quote from: Jakobud on March 19, 2004, 02:02:19 am ---You know, drilling holes for buttons, joysticks isn't this hard guys.
--- End quote ---

Maybe so. But you can guarantee that it will the 20th hole that you screw up.....

Xiaou2:


 drilling most holes isnt too tough - but you cant use a spade bit in a hand drill without a good possibility of injury.  they are made to be used with drill presses or simular.

  also... the stand device has locking angles and a depth stopper.  these work nice for special holes - that arnt so easy to do without the stand.

  why use a spade bit?   they are faster and easier to cut holes.   they are fairly cheap (yet very durrable)... and you can get a whole set for the cost of just a couple of hole saws.  (im not counting those all-in-one hole saws because they stink.  they break easily, holes arnt perfect..ect)

  fostner bits are the bomb of course... but very expensive unless you find a good deal on them.


DrewKaree:


--- Quote ---uber-craftsmen like yourself can probably drill these with a corkscrew and some beeswax, right?
--- End quote ---

THAT'S gotta  be the funniest thing I've read in a while!  BTW, why would you use beeswax?  n00b! ;)

Tiger-Heli:


--- Quote from: drewkaree on March 19, 2004, 06:51:19 pm ---
--- Quote ---uber-craftsmen like yourself can probably drill these with a corkscrew and some beeswax, right?
--- End quote ---

THAT'S gotta  be the funniest thing I've read in a while!  BTW, why would you use beeswax?  n00b! ;)

--- End quote ---
Makes the corkscrew slide in easier . . .

1UP:

Uhm...is it just me, or does that home CNC have a Dremel on it?  Wow, you really CAN do anything with those suckers!  :D

Pages: << < (5/6) > >>

Go to full version