| Main > Main Forum |
| proportional joysticks |
| (1/2) > >> |
| Bspill1:
I have been searching all over for proportional joysticks with a 5K pot. I am specifically looking for single axis models. I have had a difficult time getting through to haps controls industrial salesperson. I use the search on this forum and had no luck. Thank you in advance for any assistance you to offer. |
| JustMichael:
You wouldn't happen to mean analog joystick, would you? |
| Chris:
What is this for? You might have better luck looking for a throttle control, as that would be the most likely use for a single-axis analog joystick... Example: http://www.happcontrols.com/driving/50008300.htm --Chris |
| Bspill1:
yes I am looking for a single axis analog joystick with a 5K pot.throttle control is my intended use. A joystick is preferable over a T handle. Duplicating the action of my electric wheelchair with a joystick would be the most accurate controls for me. Thank you for the fast response. |
| Chris:
On the T-handle throttle I mentioned (which has a 5K pot), the T-handle is a separate part number from the shaft, so it may be removable. It also looks like the bat-handle 50-8018-16 may fit that throttle. Here's a view of the 5K analog T-handle throttle: And here's a view of a two-position bat-handled shifter: So if you do get a Happ engineer on the phone, hopefuly they'll know if shaft 50-8018-16 will fit on one of the throttles. At that point you ave two choices: one that returns to center (http://www.happcontrols.com/driving/50008300.htm) and one that doesn't (http://www.happcontrols.com/driving/50818400.htm). --Chris |
| Navigation |
| Message Index |
| Next page |