Main > Main Forum
Help! Anyone here got original Centipede upright?
Jakobud:
Uhhh it doesn't really matter if the 3d model is made in arbitrary units guys. All you need to know is ONE dimension from the original cabinet.
Like lets say you know the depth of the cabinet is 60" and that is all you know. Just look at the 3d model. THe depth on it is 2.5 units and the height of it is 5 units. This means the height of the real cabinet is 120".
If the 3d model was made PROPORTIONALLY correct, then that is all you need. Just use simple math guys. Ratio highschool stuff.
Anyways, just get ahold of the guy who made the 3d model. He had to get the dimensions from somewhere (or he might have just eyed it off of image planes).
jakobud
1UP:
--- Quote ---Uhhh it doesn't really matter if the 3d model is made in arbitrary units guys.
--- End quote ---
)p(:
I used a new version of max when I made the first cab and had forgot to set the units from inches to centimeter. That is why now instead of 1 unit= 1 inch. It is one 1 unit the system thinks is 1 inch is 1 centimeter.
H,W,D are fairly accurate got them from some website. the rest is by eye.
Sorry that i buggggeddd you 1-up
1UP:
--- Quote ---I used a new version of max when I made the first cab and had forgot to set the units from inches to centimeter. That is why now instead of 1 unit= 1 inch. It is one 1 unit the system thinks is 1 inch is 1 centimeter.
H,W,D are fairly accurate got them from some website. the rest is by eye.
Sorry that i buggggeddd you 1-up
--- End quote ---
)p(:
--- Quote ---
GRRR! ARRGGGH!
--- End quote ---