| Main > Main Forum |
| Help to fix a Midway HyperDrive Yoke Joystick |
| (1/1) |
| GGKoul:
Hello I just acquired this non working Yoke joystick that was used on a Midway Hyperdrive cab. And I have a question for the experts out there. Based on the pictures I've posted. What do I need to get the Yoke joystick in working order?? I understand I need to purchase a Gear and another "pot" (whatever that is). But do you see any other parts I may need And does anyone know where I can purchase these parts? Many Thanks!! -GGKoul |
| GGKoul:
Picture 2 of the internals |
| GamingGreg:
It appears you are also missing the parts needed for the x-axis. They would be similar to what you've got for the y-axis there (some sort of turntable bearing, pipe to hold centering springs and to house wire, another set of gears and a pot, and any mounting hardware). Also don't forget you'll need something to interface this to the PC. If you use 100K pots this could be hooked to a standard joystick port connector. Or you could use 5K arcade pots and hook it to a hacked Microsoft sidewinder joystick (USB). |
| Gamecab:
GGkoul, Would you like to send it to me, I can add the needed pots and gears to complete this for you? Charlie |
| GGKoul:
Gamecab.. Wow!! Thanks forthe offer... I just sent you a PM. |
| Navigation |
| Message Index |