| Main > Consoles |
| Dreamcast and PC switcher?? |
| << < (2/2) |
| MrPoPo:
I have a low-res arcade monitor (only 15 KHz) I have the same problem with all the games except one Japan game called Black Matrix.With this the image is static. |
| Dave_K.:
--- Quote from: MrPoPo on March 11, 2004, 09:45:06 am ---I have a low-res arcade monitor (only 15 KHz) I have the same problem with all the games except one Japan game called Black Matrix.With this the image is static. --- End quote --- If you are seeing a flicker when playing something like Soul Calibur at 15khz RGB, then its probably something to do with your monitor (may need adjusting). |
| Hellfromabove:
--- Quote ---I got good news today. My new Cab's 29 inch monitor is switchable to 15khz. Now I need to figure a way to switch between a dreamcast and a pc running Mame. The pc will probably go out using an ATI card running 15khz. (here I come ultimarc) the Dreamcast needs to be hooked up....Here's my question. Can I hack a scart cable to output rgb at 15khz... If yes what would be the best way for me to switch back and forth from a pc to a dreamcast for the Cab. and Last. whats the best controller to hack for a control panel. I'm going to start on the Cab this weekend!!!!! --- End quote --- Well to switch between my PS2 and DC pad I just used an SPDT switch and just used the switch to switch the grounds. Just one flip and I could use DC or just flip it again and I could use the PS2. This eliminated the purpose of trying to use a printer cable which I used once and I didn't really like it. Here's a link to the switch: http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&product%5Fid=275-711 Thanx. -See Ya!!! |
| Navigation |
| Message Index |
| Previous page |