| Main > Main Forum |
| ISO RGB pushbutton |
| (1/1) |
| barryabrams:
I’m looking for a translucent pushbutton that has an embedded neopixel/ws2812. I found t sticks 2-in-1 button which would work great if I needed a 2-in-1 button, but I really need a non-split regular button. Anyone have a source? |
| criteriascenario:
Hi, I’ve worked on this issue before and it usually comes down to a configuration parameter that the machine won’t run without when the chuck status isn’t detected correctly. There are a couple of work-arounds depending on the exact SE2200LM control setup you have. If you want, I can guide you through the steps I used to bypass the chuck-close requirement and get the machine running with a manual chuck. Just send me a message and I’ll walk you through it. You can reach me at: creedtech7 at gmail dot com Sent from my A11 Pro Max using Tapatalk |
| Navigation |
| Message Index |