| Main > Main Forum |
| IPAC-2 +Pac-Link +Sanwa joystick and buttons +Xbox 360? |
| (1/1) |
| iRunfast:
Hi, First time here :) Need help with controls. My setup; 1 player arcade cab with 1 joystick and six player buttons (all Sanwa) + 10 extra/available buttons. (Built the cab myself). 32” lcd monitor in Tate mode Xbox 360 RGH 3.0 only running Tate schmups I-PAC-2 (2015) Pac-Link Is it possible to get this setup to work, I mean is it possible to control/play the 360 via the Sanwa controls? Where do i start? Regards Robert Sweden |
| nugarp:
I did this a while ago. I had used a RS232-input KVM to swap the monitor input to the x360 and a ton of relays to redirect the output from the happ buttons to a soldered 360 pad instead of my ipac2. That was 11 years ago. Now, most xbox 360 tates are on steam and/or Xenia is far enough along that you may not need that 360 at all anymore. If I were to do it again, I would consider steam + xenia, and ditch the 360 completely. It will simplify things A LOT. See here: https://forum.arcadecontrols.com/index.php/topic,138229.msg1434833.html#msg1434833 |
| iRunfast:
Well well, i think ill follow youre advice then. Thank you nugarp :applaud: |
| Navigation |
| Message Index |