Arcade Collecting > Merit/JVL Touchscreen
Merit Megatouch XL6000 hard drive issue
apinbalwiz:
Hi
I'm a real newbie with this...I picked up a Merit Megatouch XL6000 machine that only displays solitaire games. I was told that the hard drive causes this, I had my son clone it but the results are the same. Is there something else that needs to be done to get it going? Thanks!!
Megatouchmike:
XL 6000 is CD based so assuming it's been updated to a newer version. Anyway it's likely the nvram has been corrupted so try a two button clear
apinbalwiz:
Thank you for your reply! I tried the 2 button clear (I think the 2 buttons are the ones labeled set-up and calibration) but I get 2 Invalid drive specification errors and a Bad command or filename D:\> error. This is with a new hard drive - if I put the old one back in I get to the solitaire stuff. Please help!!! :dizzy:
Megatouchmike:
Do the clear with the old drive
apinbalwiz:
--- Quote from: Megatouchmike on August 02, 2025, 08:34:25 am ---Do the clear with the old drive
--- End quote ---
Thank you again, I will. Just to be sure do I do this with the power off or on?
Navigation
[0] Message Index
[#] Next page
Go to full version