| Main > Main Forum |
| To Frame, or not to Frame? |
| (1/4) > >> |
| Santoro:
LilWolf's post here: http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=16930 got me wondering. I used Scott's Unicade as a model for my cabinet. It has an internal 2x4 frame and it feels strudy as all heck. Even with my 27" D9200, there is no lateral sway whatsoever. I love how industrial strength it feels - but MAN is that Cab heavy! I am going to be building a few cabs for possible individual sale and they must be completely, totally sturdy. I would like to get a feel for how the group feels about the sturdiness of thier frameless cabinets. If could build a lighter cabinet with the same strength I would do it in a heartbeat. {edited for spelling.} |
| hyiu:
I have a couple extra pieces on the monitor and the base for extra support, but I don't think it would consider frame.... that's good enough for me... ;) |
| Stingray:
I didn't build my cab, it's a converted Midway cab. It seems to be made mostly of MDF, but it's got some plywood in it too. It doesn't have a frame, but it does have some 2x2 bracing inside. It was built in 1982 and is still steady as a rock. -S |
| 1UP:
My cab doesn't have a frame and it is solid. It does use 1x1's to join the sides, but that can't really be considered a frame as none of the 1x1's are connected to each other and so does not have any underlying structure. The 1x1's don't add much to the weight like a 2x4 frame would. Also, I am talking to a builder about having my cabinets mass-produced, and he says a frame isn't necessary at all if you put the panels together correctly (he recommends using dadoes.) |
| FractalWalk:
I have a 1up cab design and it swayed slightly, so I put a diagonal strut from the monitor shelf to the top of the opposite side wall. Now it's a brick. |
| Navigation |
| Message Index |
| Next page |