Arcade Collecting > Merit/JVL Touchscreen
JVL Retro File System Corrupted
STL_Tom:
Not sure what I need to do to fix this problem.
I have a JVL Retro iTouch 11. It has been working great for years. Unfortunately, it now gives a "File System Corrupted/Factory reset required" screen at each power on. Pressing the Setup button completes the Reset and allows me to enter the game, afterwards.
The IO board has no battery. I replaced the CR2032 on the motherboard with a new one. I did "Load Optimized Defaults" & "Save" in the bios. It still wants to pop up with the file corrupted error screen.
I have the IT11 v1.0.D3 CD. I have reinstalled from USB. Still wants to go through the Factory Reset after power up.
Any idea or help is very much appreciated.
mahkeymike:
IOboard battery does not look like a cr2032, it looks like a shorter AA battery but is 3v lithium that had two solder pins welded on each end.
Tomcat_STL:
I had to update my email. Took awhile to figure out the activation was getting blocked.
My IO board does not have a battery.
Here is a photo…
Tomcat_STL:
UPDATE: I got it sorted. Ultimately, some clever person soldered a CR2032 holder on the backside of the I/O Board. It stops complaining about Corruption if you feed it a new button cell!
mahkeymike:
Nice. I soldered a cr2032 batter holder in one once but it didnt work for some reason. Looks like they added some resisters, maybe thats why mine didnt work. I didn't look into it any further and just ordered the correct battery from amazon.
Navigation
[0] Message Index
[#] Next page
Go to full version