Arcade Collecting > Merit/JVL Touchscreen

Megatouch Force Ion Motherboard Replacement

(1/1)

bbddpp:
I've got a Megatouch throwing the dreaded POWER SAVING MODE, DSUB ANALOG message after it wasn't powering on and I replaced the CR2032 and attempted to short it on.  Otherwise, no power.

From what I'm reading it's likely I need a new motherboard - frustrating when the stuff that is supposed to work like the shorting of the power due to a bad CMOS battery - doesn't work.  But it is what it is.  Motherboards die.

I've got an Asus K8N-VM/S inside.  there's a daughterboard above it as well which I assume (hope?) is fine.  Is there a suitable replacement for this board that doesn't cost the $200+ they are commanding on ebay?

My thanks.

mahkeymike:
What version software are you running? If 2009 or higher, you can ( with a little modification ) fit a Intel D945GCLF2 in there. You will need different ram (i would get 512mb) for that motherboard, but it does come with a built in cpu/gpu.

I do have a few ASUS K8N-VM boards, some new old stock and some used. I would probably sell new old stock for $150 but you would have to use your cpu and ram. Used ones im not sure if work or not but i would probably sell them for $50.

Navigation

[0] Message Index