Main > Main Forum
I-PAC Ultimate - Mode switch on command line
LilaQ:
Hi guys,
I'm running 2x IPAC Ultimates. Sadly it won't change modes, neither through WinIPAC's GUI, nor through the command-line. I can switch back to Keyboard, but when I try to load my DInput profiles it will either just stay in Keyboard mode (but with different key / button configs loaded), or it will switch to XInput instead of DInput (that's when I save the default IPC from mode #2 DInput).
Any help here? Would really need to be able to switch modes through command line, that's one of the biggest reasons I went with this setup.
Thanks
LQ
fatfingers:
Any chance you're running into this issue
--- Quote ---I-PAC Ultimate I/O new version 1.56 corrects an issue with mode changes not happening when trackball/spinner are connected.
--- End quote ---
as reported on this page? https://www.ultimarc.com/control-interfaces/i-pacs/i-pac2/?selected_section=product_tab_25#product_tab_25
LilaQ:
Had this issue before (wouldn't switch at all), so I flashed both modules with 1.56 - and am now experiencing the issues with not being able to switch with command line or profile loading in the GUI.
Andy sent me an email to check if my DInput profile has *any* keys in it, which would make it fail to switch. So I'll check that next once I get home from work.
Fursphere:
I've never been able to get this to work consistently.
I just hold the SHIFT button and press whatever button to select the mode I need.
LilaQ:
Not really an option for me. I want automation from top to bottom, I don't want to relay the responsibility of selecting the correct profile to the end user.