Software Support > GroovyMAME

Hit Enable edid emulation by accident, need help

<< < (3/3)

haynor666:
You need EDID emulation only for outputs that You are using like analog VGA. No need to set digital outputs like HDMI unless you are using digital to analog converter I think.

Milsancho:
Indeed I'm using a DAC as I mentioned. What I do is switching between a 15khz CRT and a PC CRT by right-clicking on the desktop and entering the display resolution app. I think there's no need to emulate the edid for the PC monitor despite using a DAC because the app acknowledges it with its brand and model, though certainly the behavior is not exactly as if the VGA output was used. For example, I'm forced to keep the monitor turned on even if I'm using only the 15khz TV otherwise the system crashes.

Available resolutions for this display are very limited as well, as I'm not sure how to proceed to add custom modes with a setup like this. Should I generate modes with Video mode maker with a multi-sync preset which contemplates both monitors or should I just leave the modes generated with the current 15khz preset and add +31khz modes with an external tool? Will then the modes be available with Arcade OSD?

Calamity:
VMMaker will target a specific output when it installs modes. You select the output in the device list. Then, you can apply a different monitor preset for each output, like 15 kHz on one and 31 kHz on the other, generate and install modes independently.

Milsancho:
Fantastic, It's alll so welll thought out. I missed the Device list somehow. Gotta try it soon.

Navigation

[0] Message Index

[*] Previous page