Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Megatouch Force reboot loop  (Read 1912 times)

0 Members and 1 Guest are viewing this topic.

gdamats

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:November 08, 2024, 10:30:57 am
  • I want to build my own arcade controls!
Megatouch Force reboot loop
« on: November 04, 2024, 02:30:12 pm »
Hi All,
I have a Megatouch Radion Force, Model G20-107-006. All of the sudden, it will not boot up. It powers on, walks though the system and software check, but then the screen goes black for a few seconds and then it says that system reboot in progress and it keeps repeating that process. Any idea what's wrong here? Random things to note are listed below.
- Got this from a friend a few years ago (wasn't working), I replaced the processor and it's been working perfectly ever since (about 3 years now)
- It never gets moved from where it sits (no chance of random physical damage)
- The CPU fan powers on and the inside is relatively clean
- I've removed and re-seated the ram, did not fix the problem. I moved the ram to the other slot, did not fix the problem.
- I did not notice any bulging capacitors on the motherboard

I've attached a few pictures of the inside as well as a screenshot of the final language just before it reboots. I have a video of the entire boot if that helps too.
Any ideas here would be appreciated!

Megatouchmike

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 131
  • Last login:December 04, 2024, 07:07:54 am
  • I want to build my own arcade controls!
Re: Megatouch Force reboot loop
« Reply #1 on: November 05, 2024, 08:13:07 am »
Try a factory reset

gdamats

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:November 08, 2024, 10:30:57 am
  • I want to build my own arcade controls!
Re: Megatouch Force reboot loop
« Reply #2 on: November 08, 2024, 10:17:49 am »
Try a factory reset
Bingo! That worked like a charm, thanks Megatouchmike!