Main > Driving & Racing Cabinets

Cruis'n does not "cruise" for me

<< < (2/2)

Klipp:
Ok will do. Thank you for that :-)

frankrizzo2:
You could also swap the brake and gas potentiometers too and see if that changes anything after a calibration

Klipp:
Hey FrankRizzo- I actually *Did* swap the wires for gas and break. Nothing was different... the car couldn't 100 mph and no double pump. But thanks for a good suggestion :-)

Klipp:
Ok so here's the results (in case anyone else has this problem and wishes to know)

Even thought there is a calibration requirement upon powering up (and I do the calibration... turn wheel all the way to the left and hit the button, turn wheel all the way to the right and hit the button, stop on gas all the way, step on brake all the way), that didn't do anything.

HOWEVER, when I went into the menu and went to calibration and did *exactly* the same thing, it fixed the problem. The flames came back from a double pump and I am now able to go over 100 mph.

Woo hoo!! Thanks everyone for your great help and advice.

Kim

Navigation

[0] Message Index

[*] Previous page